1 / 2
Prusa XL Buddy Cover For M4 Inserts & 60mm 24V Fan — zdjęcie 1
1 / 2

Prusa XL Buddy Cover For M4 Inserts & 60mm 24V Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keep your electronics cooler so they live longer

Ocena
5 / 5
Polubienia
11
Pobrania
47
Wydruki
1
Wyświetlenia
347
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

🟩 🟦 🟦 🟪 🟥 🟧 🟨

I wanted to run a 60mm 24V fan as I don't really want a cheap buck converter in my printer and also use M4 inserts to mount it, so I made this little remix. I also found the STEP file of the original did not have space for the Nextruder cables out the top leading to cable pinching, so I added this back too.

I used the RS Pro fan part 7874007 and Orion Fans filter part GRM60-45. The fan pulls cold air in and the filter is on the outside to stop dust getting in. Note the fan does not have connectors on the end. Also I used 4x M4 Ruthex inserts and 4x M4x35mm screws to do it up.

In my case the 24V output on the buddy board has the screws overtightened at the factory, so I ran the cables down to the PSU below it and crimped connectors on the end. However if you are able to use the buddy output you can route the cable through the hole provided at the back, where the Nextruder cables go.

Consider that this should maybe be printed using something heat resistant. I used Prusament PC blend for mine.

If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee using the button below. Thank you!

🟩 🟦 🟦 🟪 🟥 🟧 🟨

Tagi