Simple Orrery (Tellurion) Desk Toy Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
initially designed to be a few 3d printed pieces combined with milled wood. works as fully 3d printed, just basic.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 1279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
I modeled this a while back. My goal was to make the two parts that required gears with 3d printing. The base and outer ring can be milled out of wood. It worked but the milled wooden ones were slightly off on scale so the gears had a hard time. I tabled it a few years ago, and I planned to come back and make it more elaborate. I never did.
I just pulled this out of my archives and tested to see if it still works. It does, so here it is. I’ll probably make one that is a little more aesthetically pleasing at some point.