Hypercube ultralight/ultratight XY assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bit revisited original Hypercube design to reduce distance between X tubes and to shift my fancy hotend closer to them
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi, this is my own design for Hypercube that features Chinese HGX-lite feeder, TZ E3 2.0 hotend with bambu-compatible heatblock system, 3010 fan for hotend cooling, 5015 fan for part cooling. No ABL probe yet, but for my particular case - dont need that.
Same bearings used for XY idlers as in original Hypercube. In my project I used 10x1 mm aluminium tubes (carbon tubes I bought were about 0,1mm thicker than needed, so I dont want to switch yet). For X carriage youll need to buy OD 12mm ID 10 mm sleeve bearings up to 20 mm in lenght (in my build now used 10 mm length)
Bearings i used:
https://www.aliexpress.com/item/1005006524020677.html?spm=a2g0o.order_list.order_list_main.89.6ea41802BzOV5F
For more recent files:
https://cad.onshape.com/documents/75ae41a3d8895ca09fcad3b7/w/9ceda421a5b265904d3cb029/e/2da1c18ce9d2a6ba7e8aea8e