Anker PowerPort Atom III Flex Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple of very well fitting flexible mounts
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
I need space in the workshop as well as some USB power, so I scanned my Anker PowerPort Atom III and made this flexible mount using a cross section of the scan. The fit is excellent - not too tight, not too loose.
There are two versions, one that mounts via a single screw hole, ideal for hanging from walls or other things and one with two screw holes on each side, so it can be mounted easily in other orientations.
The holes in each model are 5.4mm wide.
Both models print with no supports and slip on snugly to the device. There are some holes to help heat escape. I used Fillamentum Flexfill 98A for my print but any TPU will probably do.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨