Aeon Pro X pump grip (requires 4 m3 by 10 mm screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Vulcan's APX pump grip, but it prints in 3 seperate parts to be more convenient.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 831
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the minimum grip for Vulcan's APX pump mod. To use you need to slide the dovetails together and then screw the bars to the part where the grip goes. You should get the extended muzzle to use the mod better, I used the one that looked the most flat on Vulcan's page. You should probably print this with 4 or more walls, and high infill (minimum is probably 90%). The parts will probably need a significant amount of support around the pic rails, and and the detailing around the priming bars.