1 / 7
Ender 3 S1 / S1 PRO X axis C920/C922 Logitech (GoPro support) — zdjęcie 1
1 / 7

Ender 3 S1 / S1 PRO X axis C920/C922 Logitech (GoPro support)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your C920/C922 Logitech to your X-axis! No axis disassembly is required.

Ocena
0 / 5
Polubienia
6
Pobrania
36
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

No axis disassembly is required. The arm fits nicely on the end of X-axis.

UPDATE V2: Vertical version!

( I need to improve light now 😅)

Since my printer is sideways in my closet, the v1 was a bit impractical and I kept bumping into it. So I decided to make a “slim” version. I rotated the camera 270 degrees and, for simplicity, removed the GoPro base. Now you can attach the GoPro mount directly to the arm using a 4mm bolt and nut. this version only have the left/right angle adjustment, to simplify the design I opted to not tilt it up/down, and tbh I believe I wouln't use anyways.

For V2 you will need:
1pc- M4 x 10mm
1pc- M4 nut


Original description: V1 - Horizontal

 


My version for using a C920/C922 Logitech as a webcam in the X-axis for my S1 Plus (should work for regular and Pro models also).

 

For V1 you will need:
3pc- M4 x 10mm
3pc- M4 nut

____________________________________________

For instructions about the unmount the webcam and assembly the mount, check the description of the model: 

https://www.printables.com/model/1053162-logitech-c920c922-gopro-mount-bottom

Fusion 360 file included.

Tagi