Paramaterized de-soldering sucker mount for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A de-soldering pump holder for the Honeycomb Storage Wall, parameterized in OpenSCAD for your convenience
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 2
- Wyświetlenia
- 401
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't see a de-soldering pump mount for the honeycomb storage wall, so I made my own.
Library requirements
This requires you to install the BOSL2 library to work. There's also a mesh, but you don't want the mesh, you want the OpenSCAD version so you can crank out whatever dimensions you desire. The default setting is what worked for both of my de-soldering pumps so it might work just perfectly for you.
Printing settings
It's designed to print without supports and go straight into the honeycomb without needing any extra inserts.
Apparently you can use almost anything? I printed it with Elegoo Rapid PETG on my Voron Trident and it works just fine. I've also printed stuff with the KYZ clips using PLA and that works. ABS/ASA, probably regular ol PET.. just use 3 or more perimeters.
If you like this:
- I have a paramaterized honeycomb storage wall that will fit any size
- I have a paramaterized 90 degree angle joiner, for the corners.
- I have a paramaterized ruler (or other long rectangular things) holder
- I have a paramaterized ChipQuik liquid flux organizer
- I have a paramaterized feeler guage holder.
- I have a collection of all of the Honeycomb Storage Wall bits I use myself