1 / 4
Balance Lead Connector Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your balance leads connected with this clipper.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
I use multiple balance lead extensions in series as the charger and the battery are separated from each other. However the connectors of these balance lead extensions don't hold together very well and disconnect all the time!
Here is the solution: A clip that permanently holds these connectors together.
Note:
- The balance lead connector type is: JST-XH 2.54
- The vertical fit (along the leads) of these clippers is rather tight and it is a little difficult to put them on.
- If you try to attach and detach these for every charge you may consider to reduce the size of the notches so they are easier to put on and off.