1 / 3
Sovol SV08 Dragonburner X-Carriage mount for printed Gantry — zdjęcie 1
1 / 3

Sovol SV08 Dragonburner X-Carriage mount for printed Gantry

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had to shorten the Dragonburner X-Carriage mount after changing to Nadirs printed Gantry parts.

Ocena
0 / 5
Polubienia
31
Pobrania
139
Wydruki
0
Wyświetlenia
1268
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I had to shorten the Dragonburner X-carriage mount after switching to Nadir's printed gantry parts. The original Dragonburner X-carriage mount was slightly too long, preventing the printer from homing correctly. So, here's the modified, shorter version.

Tagi