Case for OLIMEX TMS320-XDS100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the OLIMEX TMS320-XDS100 v3+ JTAG Programmer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
this is a commissioned model for my workmates from our electronics testing department.
A nice case for their JTAG programmer pcb (OLIMEX TMS320-XDS100 v3+ JTAG Programmer).
It is a two part case for use with 8x M3 inserts. The input is from PC >> USB-cable >> USB connector on the pcb. The output is then pcb >> cable work >> DSUB15 connector and 4 mm bananna plugs (power connection) >> testing jig.
my print settings:
- filament = M4P ESD PLA (black)
- 0,25 mm layer height @ 0,4 nozzle
- 3 perimeters
- 5-10% gyroid infill
- solid layer: 3 top & bot
- supports: yes, see pictures
- print orientation as in the pictures
Print time total: about 3h for me on my MK4.
The grey print was my final prototype. The color change was not indented. I ran out of grey filament. The black print is our final production model with esd safe material.
On the bottom are 4 small indentations. These are placeholders for 5mm rubber feets.
One of the domes is chamfered a bit because of 2 close THT pins on the pcb.
Update 13.11.2024
- added 3 pictures of the internal cabling
Happy printing!