Gyoto Magnetic Knife Holder With Edge Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little thing I came up with to hang my gf's knife on the wall. More Info Below.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
UPDATE: 3-1-2026: Added Edge Guard and drill guide stls and photos.
Got this knife for my girlfriend for her bday and wanted to do something to make it easy to store and also look interesting.
This is the knife if anyone is interested: https://www.ketuousa.com/products/kawahiro-kh-6601
These are the magnets that I used: https://a.co/d/2cBcQhj
I printed the components in PLA. If you are worried about the small lip that holds the magnets in place, I would use PETG instead.
I also modeled the piece of wood used, the dimensions, so I can visually see what it would look like in the model. You can use it if you want to get the dimensions correct to what the models were designed for.
The handle mount's drill guide: Drill Guide_Handle, (ORIENTATE CORRECTLY).stl has to be orientated with the holes facing up when drilling. If you get it upside down, the position of the handle relative to the magnets will be wrong. I laid out the drill guides on the piece of wood and placed the knife on top before drilling to make sure all was well.
I printed the magnet stand off with the very specific orientation, ( all pieces should be correctly orientated when you download and slice them, but double check ). Print with the magnet cutout at the top and use supports, it will make it much easier to get the small lip to print correctly. After printing, you can just pop out the little support.
When I was ready to drill, I just used painters tape to hold the drill guides in place and a piece on the bottom of the wood as well to help prevent the drill from blowing out the back side of the wood.
BE CAREFUL ASSEMBLING - THE MAGNETS ARE VERY FRAGILE AND COULD BREAK IF THEY SNAP TO EACH OTHER
As usual, please post your makes :)