Rayla's Balisong/Balisword Daggers from The Dragon Prince
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a painted and tweaked version of Rayla's swords from The Dragon Prince. The goal was to make assembly easier.
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 645
- Wydruki
- 0
- Wyświetlenia
- 2427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
_You will need OrcaSlicer for this file to load correctly_. I tried with Bambu Studio and it does not (currently) open seamlessly. I don't know if PrusaSlicer will do better.
I have tried to label the build plates in a way that makes them intuitive to know what you need to print.
Start by printing the blades, then the handles. From there the rest of the parts should start to make sense.
I used super glue which discolored the filament where it oozed out, I'm not sure if there is a better glue option. I used an xacto to scrape it off as best I could.
Filament used:
- Flashforge Burnt Titanium
- Bambu Silk Blue
- Bambu Basic Silver
- Bambu Iridium Gold Metallic (or Bambu Bronze)
- Bambu Support PLA