E3D V6 Hotend easy maintenance carriage for Felix 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extruder carriage system to change between Felix extruder and the E3D-V6
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple modification to the magnific extruder carriage system designed by satoer. I wanted to be able to have a simple method to change between the original Felix extruder and the E3D-V6. Using the original Felix carriage i'm now able to mount the satoer extruder system. Fix this new part with 2x long M3 screws. I printed these parts in ABS and have been using for 2years with no problems at all.
Attention: To use this complete system you need to print two more parts from the original design from satoer: "Felix_E3DV6_cooler_door_V1" and "Felix_E3DV5_fan_duct_V2" (http://www.thingiverse.com/thing:484581)
Special Thanks to Satoer for this great design.