CattyWimpus - 1LB Plastic Combat Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small, open air safe combat robot meant for Demo events and general fun!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
This is a design that I recently finished, meant to imitate the 3lb combat robot Cattywampus, designed and built by Brandon Young.
Part's List:
Malenki Nano (or 5AX2 & Small 4 channel receiver combo)
2s battery (300mah approximate)
2x n20 gearmotor (Get them on Turnabot's webstore, they are great!)
Continuous Mg servo (DS3218MG)
Power Switch, either glue in your own (or modify the file), or use the on made by Ty on the Macro Discord
Assorted M3 hardware, designed for countersunk and socket-head screws
I suggest using nuts if this is going into combat, or heat-set inserts if it is just for fun
Print Materials - The back flapper should be made of TPU, and the rest should be PLA+
You will need to find wheels that fit a 3mm d-shaft, with an approximate 40mm diameter. I suggest using 10mm EVA foam and a 3d printed hub, the file is included.
If you have any questions, ask on the MACRO Discord, we are a great help if you want to start combat robotics, or join our event down in Baltimore!