MtG token tapped and untapped counter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small box to put your token in, that provides two counters to indicate hown many tapped/untapped of these you have
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
This is a frame to put a token in. It embeds two counters to keep tracked of how many tapped/untapepd of them you have.
- To put it in, just put your card in a standard size sleeve (I use Dragon Shield + perfect hard inner sleeve). Insert it in the hole at the bottom and slide it up until it falls in the card-sized rectangle;
- To put it out, press the back a bit, and slide the card to the bottom.
Enjoy!
Assembly instructions:
To build a case, you need:
- Bottom x1;
- Top+rectangles (add them simultaneously to PrusaSlicer to have them positioned correctly) x1;
- Wheel x4.
When done printing, you can sand the borders of the wheels a bit so that they turn better.
Then print the digits on adhesive (transparent) paper and stick them on the wheels (2 of each). I provide a PDF (A4 paper) with a few of each already.
Put the wheels in the correct places, clip everything together, and you're good to go!
Files:
The provided .3mf and .gcode files were made for a MK3S+ with MMU2S printer (0.1mm /0.4 extruder):
- One for the case, top and bottom;
- One with the wheels.
I used:
- Generic white PLA for extruder 1 (wheels + rectangles);
- Generic black PLA for extruder 3 (frame). Works well with Galaxy black too;