1 / 1
Furniture feet for flatbottom cabinet — zdjęcie 1

Furniture feet for flatbottom cabinet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are 50mmx50mm at the top and 35x35 at the bottom with 3mm chamfers, 25mm tall. 3 holes are set for #8 screws.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

I needed feet to raise a flat bottom shoe rack up over the quarter round molding to fit it into a corner.

These are 50mmx50mm at the top and 35x35 at the bottom with 3mm chamfers, 25mm tall. 3 holes are set for #8 screws.

Printed upside down in PETG on a Snapmaker J1S.

2 bottom layers.
4 top layers.
10 outside walls.
10% Infill.

Tagi