1 / 4
Apple Watch Charging Stand - Floating Puck
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low-profile, sleek charging stand for your Apple Watch with cutouts for VHB tape or 6x2mm rubber bumpers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This low-profile, modern, charging stand for your Apple Watch looks great even without a watch on it!
Assembly
- Slot the charging portion onto the base
- NOTE: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C.
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.
Printing
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
- Tip: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
- This adds some additional weight to the base
Features
- VHB tape cutouts on the base
- Cutouts for 6x2mm rubber bumpers.
- Note: I highly recommend you use the VHB tape cutouts on the bottom of the base!
Happy printing!
Want to sell this print? Become a member today!