1 / 2
Tight Print-In-Place Bag Clip 13 cm and 15 cm (tight version)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger versions of @neoyarus's bag clip model, with 13 and 15 cm length.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 100
- Wydruki
- 2
- Wyświetlenia
- 666
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (21)Powiązane
Remix of @neoyarus's model for 13 and 15 inch length.
Printed with Prusament PETG, 0.4 and 0.6 mm nozzles, 15% infill, 3 perimeters, 0.2mm or 0.3 mm layer height.
I much prefer the “tight” version over the original version as it won't open accidentally. But I found it to be sensitive to correct calibration, a bit of overextrusion and it won't open and close easily without taking the dremel of sanding paper to the nub that keeps it closed.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.