1 / 1
Honda SCL500 CB500X CB500F Rear Brake Fluid Reservoir Cover — zdjęcie 1

Honda SCL500 CB500X CB500F Rear Brake Fluid Reservoir Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in colour of your choice and clip over the Brake fluid reservoir. Serves no purpose but colour change.

Ocena
0 / 5
Polubienia
3
Pobrania
45
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sized to fit Honda SCL500 but should fit other bikes that use same rear brake fluid reservoir.

Support material required for the window. Doesn't use much and this should be a quick print.

I don't think you need consider ASA.  You can use PETG but I would just use PLA for the best colour selection if don't store bike outside.

 

If it's not obvious this model is shown in the picture as it is printed, upsidedown.

 

Tagi