Raspberry Pi 3(2) OctoPi Case for Prusa i3 MK3 with Cam-Cable-Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After some Prototypes i've desided to make new case for my Prusa MK3's Raspberry OctoPi with an integrated Cablespool…
- Ocena
- 3 / 5
- Polubienia
- 20
- Pobrania
- 205
- Wydruki
- 2
- Wyświetlenia
- 3739
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
After some Prototypes i've desided to make new case for my Prusa MK3's Raspberry OctoPi with an integrated Cablespool for the flatcable of the Pi camera. It can be pluged in the 3030 Extrustion left beside the Displaycase of the MK3.
You need a 75-100cm Raspberry Pi flatcable for the Spool. The Cammount is modified with a new Cover with Cableduct. The Shaft is now prepaired to hold a nut and the cableholder is modified to guide the cable a bit better.
I've used as Basecase the Case from hackoholic and his Cammount.
Update 30.03.2018
I've added a Version to mount the Pi on the right front side of the MK3. The Object's are mirrored and modified but not printed and tested ! Please give Feedback
NOT FOR MK3S !
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.20
Infill: 20%
Notes:
I've uses Supports for the Basecase in the Spoolcase.