1 / 1
MK4 and MK4S Loveboard Cover in one part — zdjęcie 1

MK4 and MK4S Loveboard Cover in one part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Both covers in one single part.

Ocena
4,833 / 5
Polubienia
18
Pobrania
110
Wydruki
6
Wyświetlenia
859
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

After updating from MK4 to MK4S I recalibrated the printer and was again faced with an error on the X-axis.
Instead of simply removing the small cover casing that issue I though to just “clue” both part together.
It works fine on my printer, but if you use it mount the part carefully to not damage the two cables on the right extruder side.
Needs a bit of support.