Glasses Holder Desk Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have several pairs of cheap reading glasses with different magnification and until I made this thing, they were…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I have several pairs of cheap reading glasses with different magnification and until I made this thing, they were piled somewhere in the other stuff that's on my desk. I wanted to be able to find the ones I needed (depending on how close up I needed to see something or how tiny the print), so I made this to clip on the edge of the desk. It printed about 1/2 mm too much gap to fit snugly on the thickness of the desktop, so I actually ended up putting some command-adhesive strips (releasable double-stick tape) between it and the desk to keep it from falling off or wobbling around.
So, if there's anyone else wishing for a quick solution to the same (or similar) problem, happy printing.
Timelapse: https://youtu.be/dNGpdGI8PZs
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Yes
Notes:
Seems to waste slightly less in support material if you rotate it so that it prints horizontally (see the time-lapse video).
Designed with a quick drawing in FreeCAD using a couple of sketches, extruded and filleted.
Category: Organization