Mazda Miata brake Duct (NA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mazda Miata brake Duct (NA) for the Ikon Motorsports Front lip
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 999
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mazda Miata brake Duct (NA)
These fit the Ikon Motorsports Front lip, making the cut-outs functional and forcing air into the brake rotors. These are only one part of a larger system needed to get the air to the rotor. These were designed to help facilitate airflow into a 2" brake duct. The ducting, brackets, and routing must be fabricated based on your own risk and skill level assessment.
These parts were printed in Bambu Labs PTEG-CF.
Update: Nov. 23, 2024:
- Added the .step file for the brake shield. This file will require a final fit. It will get you close, but mounting and clearances must be done upon installation.
Print settings:
Use PETG or ABS or ASA or stronger material with better heat resistance.
Layer Height: 0.20mm base with variable layer height
Perimeters: 3
Infill: 15% Gyroid
Support: Required