RC Helicopter Blade Holder (Hirobo SDX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this for my Hirobo SDX RC Helicopter. The tail boom is 21mm in diameter and the main blades are 9mm thick…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this for my Hirobo SDX RC Helicopter. The tail boom is 21mm in diameter and the main blades are 9mm thick by 55mm wide.
I printed it using Filamentum 98A FlexFill.
I designed this using parametric modeling in Fusion 360, so if you need one with custom sizes, I can easily re-mix it for your helicopter.
Blade, T-REX, HIROBO, E-FLITE
Please consider leaving a TIP for my time designing and testing this model.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Doesn't Matter
Supports:
No
.25
Infill:
15
Notes:
I used a flex fill, so that it easily grabs that tail boom, and is gentle on the blades. Have not tried other materials.
Category: R/C Vehicles