1 / 5
Ersatz Handgriff für Mars Svratka Schubladen; Replacement handle for Mars Svratka drawers — zdjęcie 1
1 / 5

Ersatz Handgriff für Mars Svratka Schubladen; Replacement handle for Mars Svratka drawers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ersatz Handgriff für Mars Svratka Schubladen; Replacement handle for Mars Svratka drawers

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ersatz Handgriff für Mars Svratka Schubladen. Wenn der Griff abbricht und in Einzelteile zerbricht oder in Verlust gerät, dann braucht man nicht die ganze Lade nachzudrucken. Den Griff schiebt man in die zwei Nuten ein welche für die Beschriftung vorgesehen ist. OK, man hat fast keinen Platz mehr für ein Schildchen, aber dafür hat man wieder einen Griff an der Lade.
Gedruckt mit PLA ohne besondere Einstellungen. Aufrecht stehend mit Unterstützung.
………………………
Replacement handle for Mars Svratka drawers. If the handle breaks off and breaks into pieces or gets lost, you don't need to reprint the entire drawer. The handle is inserted into the two grooves provided for the label. OK, there is almost no room left for a label, but at least you have a handle on the drawer again.
Printed with PLA without any special settings. Stands upright with support.

Tagi