1 / 8
Rick and Morty / Plasma Pistol 'Fake Gun' added support holes and split colors — zdjęcie 1
1 / 8

Rick and Morty / Plasma Pistol 'Fake Gun' added support holes and split colors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to print this on my 2 head XL and added holes for gluing together. Split sections for 2 color printing.

Ocena
0 / 5
Polubienia
11
Pobrania
49
Wydruki
0
Wyświetlenia
886
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

The holes are 4.3 mm to fit a threaded rod.  

Threaded Rod #8-32 tpi x 36 in. Zinc-Plated  0.1631"

https://www.homedepot.com/p/Everbilt-8-32-x-3-ft-Zinc-Plated-Steel-Coarse-Threaded-Rod-2293/332735404

https://www.homedepot.com/p/Everbilt-8-32-x-1-ft-Zinc-Plated-Steel-Coarse-Threaded-Rod-2294/332733630

(old link)
https://www.homedepot.com/p/8-32-tpi-x-36-in-Zinc-Plated-Threaded-Rod-802027/204276657

Added a ‘thumb button' for the real Rick Gun.  Morty fake gun has a Hammer, still working on finding one to add.

I put holes into the top slider, haven't glued yet, but thinking I can glue the top sections only and it will still slide back and forth.  Also had a 2nd thought about putting a slide hole in the top part so the two sides can be glued together through that hole.  

 

 

 

One more thing I thought about doing was splitting the trigger to not have to paint it black.  

 

Other not done:

Cut trigger out for a different color print.

“hammer” for the fake gun to be screen accurate, still looking for a hammer that matches.