1 / 2
Lithophone Frame 160mm x 120mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Lithophone Frame to be used with generic off the shelf LED Strips
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This frame was made to allow for the use of standard LED strips with minor soldering.
Recommended Installation:
- Using and buying 300LED per M LED strips. This model will use about 60cm
- Buy a step up DC-DC boost converter.
- Buy the USB type C female connector.
- Cut the LED strip to fit within the frame, solder the 12V pins from the led strip to the output of the boost converter.
- Solder the USB female connector to the input end of the boost converter.
- Tune the voltage of the boost converter to be just bright enough that your image is illuminated. Typically 10v is enough.
PLEASE NOTE: If the LEDs are fully driven the PLA material can and likely will warp.
https://lithophanemaker.com/Color%20Lithophane.html
- 5M 5630 SMD 300Led Strip Light 4500K Cool Warm White Flexible Non Waterproof 12V
- 1PCS MT3608 DC-DC booster module 2A
-10X USB 2.0 Type C Connector 14 Pin Female Socket receptacle Through Holes PCB