Cheese Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a dice tower with a 40mm loft through the middle to handle most sized dice.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Standard Digital File License
This is a whimsical "cheese tower" dice roller that could be straight out of a mouse wizard's workshop! The tower has layers of yellow and orange blocks shaped to resemble thick slabs of Swiss cheese, each filled with holes of different sizes. The top layer, with its many round cutouts, looks like it’s been nibbled on by some hungry critter. The sturdy orange midsection gives it the feel of a cheese wedge that has been reinforced for adventuring, and it rests on a base shaped like a waxed cheese wheel with a cutout that is melting to form the tray.
I used the plug option during the cut of each section, but it was very VERY snug and had to be sanded lightly to fit properly. The supports are kind of difficult to remove for the top section due to how many are used. The letter F in the picture is a custom option I added for the person I printed this for.