Recliner Mug Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recliner mug holder for small to large mugs
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
I could not find a mug holder for my recliner that I liked so I designed my own. I needed it big enough to fit various sizes of mugs as well as fit my recliners existing cup holders. Hopefully it fits others too but if not, please let me know and I can adjust the size. A bonus to this mug holder is not only does it fit a wide range of mug sizes but it also fits your standard soda can and beer bottle! Also included is a “platform”. This is a removable disc you can place in the holder to prevent smaller cups from tipping unevenly into the center cavity.
For fitting reference, my recliners cup holders are about 83mm and this mug holder is 82mm around the base and it fits perfect. The inside diameter of the mug portion is 115mm so any mug sizes up to about 114-115mm should fit. The diameter of the inner can holder is 70mm. The height of the bottom half of the mug holder is 56mm. The total height of the mug holder is 118mm.
Printed in PLA. The platform may do better in PETG, depending on how hot your coffee is :)
Supports under the overhang of cup portion. Print orientation should already be set by default but if it's not, print it upright with the base flat on the build plate.