"Outside funnel" -- funnel that goes over, not inside
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funnel that goes over the spout, not inside
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 190
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For really narrow openings, adding a funnel to the mix can restrict the passage too much. These funnels fit over the opening, not inside. There's a little lip so that the narrowest part of the funnel ideally matches the walls of the opening, and the funnel does not slide down the tube.
I designed these for use in flameworking, where we often need to get small stuff inside small tubes (frit, opals, etc). Ideally quickly, and without spilling them everywhere.
4 designs available, trying to cover the most common-size blowtubes. If your tube is in between somewhere, the next size up is likely to work for you.