1 / 3
Ender 3 V3 KE/SE Z Stepper Motor Spacer — zdjęcie 1
1 / 3

Ender 3 V3 KE/SE Z Stepper Motor Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Creality Ender 3 V3 KE is plagued with the instability of the Z-axis after doing the usual mods of installing…

Ocena
0 / 5
Polubienia
24
Pobrania
110
Wydruki
0
Wyświetlenia
814
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Creality Ender 3 V3 KE is plagued with the instability of the Z-axis after doing the usual mods of installing reinforcement of the gantry and TPU feet, the performance still didn't improve much.

I noticed that when checking for stability the motor side of the gantry flexed more compared to the right side. I designed this spacer to be able to snugly fit under the extruder motor to support the gantry.

The initial results were quite good, the flex on the motor side extrusion was noticeably less and it is comparable to the other side, This means that the whole gantry can be able to flex as once.

Upon checking with a test of input shaping the results were confirmed with a higher maximum recommended acceleration which surpassed the max accel of the machine which is 8k mm/s2

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 V3 KE

**Rafts:**

No

Supports:

No

**Resolution:**

0.2 mm layer height

Infill:

100%

**Filament:** eSUN TPU - 95a Blue

Category: 3D Printer Parts

Tagi