1 / 2
9V Battery Box, Split Hinge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version 2 has these improved features:
- stronger hinge that is easier to assemble
- ramped front catch
- text for multicolor
Look in https://www.printables.com/social/261776-brass_ring/collections/224415 for other sizes.
These battery boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.
The box halves require moderate infill (10%-20%) and can be printed with no supports. Optionally, you can paint on supports under the flat sections on the latch brackets, and the latch catch. I printed the box halves and latch with 0.2 layer height in PLA and the hinge parts with .12 layer height in PETG.
Assembly instructions: See the attached PDFs
Category: Tool Holders & Boxes