Googly Eye Glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give some personality to every day objects with a pair of glasses
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It prints nicely flat on the bed. I removed the screw holes from the original model so they ear pieces will need to be glued onto the frame. For the frame colors, after you load it into the slicer split it into parts to set the colors. You'll need a multi filament printer or do manual filament changes. The print in the picture was around a total of 52 changes. If you want to print the parts separately, split the model into objects in your slicer, and scale the X and Y of the glass and pupils down a bit so they will fit together.
The filaments I used are Elegoo PLA purple, black, white, and clear.