Cylinder lock model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,83 € – 1,01 € netto (bez VAT)
Dla pliku: Key_0.4n_0.15mm_PLA_MK4_59m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,92 € netto (środek widełek).
- Masa podana przez autora
- 10 g
- Czas druku podany przez autora
- 59,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Study model of a cylinder lock in a scale of 2.4 : 1
- Ocena
- 4,789 / 5
- Polubienia
- 5134
- Pobrania
- 6706
- Wydruki
- 24
- Wyświetlenia
- 82 373
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2.4 : 1 Scale Study Model of a Cylinder Lock
I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism.
Video assembly instructions:
I've always been fascinated by mechanical things, how they work and what they're used for. I was interested in the Cylinder Key Lock, especially that such a small thing can protect so many things - your home, property, safety and privacy. So I looked at this mechanical miracle in more detail.
Of course, because of this, I disassembled and damaged one of the original locks.😦
This model is more demanding, especially for the post-processing of parts after printing - removal of supports, which were necessary for some parts, their cleaning, smoothing.
Mainly, the printing layers greatly increase the friction between the parts, so I used a lubricant.
I managed to move my model, I was skeptical at the beginning, but I am satisfied with the results.
I hope it will be successful for you too, I will be very happy
The scale of the model is 2,4:1
The dimensions of the model are 160 X 75 X 41 mm without base.
The key is 124 mm long
I processed the instructions in a video
You will need 10 pieces of 7x35mm springs and 3 pieces of M3x10mm, 1pcs M4x15mm
Connect the Clutch parts A+B with an M4x15mm screw to rotate freely
The spacer goes into a Long Barrel
Just as you insert the key pins in the Long Barrel, mirror them in the Short Barrel, then Middle pins, springs and close with Ends pins
Some parts have supports, I uploaded the G-code with the settings
Important! When pulling out the key, hold the cylinder, it will pull out better
Added!!!
Modified -thicker Clip ring to prevent movement of the Cylinder when removing the key
Names of parts :
I hope I haven't forgotten anything, if so, please ask. Recording this model has exhausted me, I'm going to rest and gain energy for a new model!
I bought the springs in the OBI supermarket, but I also found another source:
https://nl.aliexpress.com/item/1005006970672268.html
https://www.amazon.com/Diameter-Stainless-Compression-Spring-Length/dp/B0B7DX4K3N