1 / 1
Magnetic Cable Management Clips for 10x3mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another magnetic cable management clip, but for press-fit 10mm-diam x 3mm magnets
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 219
- Wydruki
- 4
- Wyświetlenia
- 941
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (74)Powiązane
Found @Edward's model for 10x3mm magnets, but the needed to redesign for spouse-factor.
STLs provided for a few cable-bundle sizes.
In theory, no support is needed – the magnet hole depths have a 0.3mm tolerance to allow for bridging-droop. And the bottom of the arch is flat to allow for proper bridging.