Elgato Stream Deck Button Box Mount for Thrustmaster T300RS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Thrustmaster T300RS to mount an Elgato Stream Deck as a button box.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 1019
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a printable mount for the Thurstmaster T300RS that will let you mount an Elgato Stream Deck. It's a great way to add buttons quickly to your sim racing setup without spending a fortune.
It should be compatible with both the Mk1 and Mk2 Stream Decks. I have also included the STEP files for you to customize for your liking too.
You can print the right-hand mount, left-hand mount, or both-sides mount. An OEM replacement blank is also included.
This uses your original Thrustmaster T300RS screws for the wheel cover. Print and use at your own risk.
Printing Instructions
- Print the steering wheel base cover concave side up.
- Print the Stream Deck mount laying down, with the front facing upwards.
Installation Instructions
- Remove your steering wheel from the base.
- Remove the four screw securing the steering wheel interface cover from the base.
- Attach the steering wheel interface cover you printed, but don't attach it just yet.
- Attach the appropriate mounts for your Stream Deck onto the cover, whether you anted left-hand, right-hand, or both.
- Replace all four screws you removed.