Milwuakee M2 Extractor Set Snap Fit Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee M2 Steel Screw Extractor Set 4PC snap fit case
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The Milwaukee M2 Steel Screw Extractor Set 4PC set does not come with any sort of case or storage. I designed this case to be compact and robust. It slides together and snaps into place. I printed this in PLA, but will reprint it ABS or ASA if the snaps end up giving me any problems, for now they are holding up in PLA.
Both parts should be printed vertically, the slide should be printed on its front face (the widest part), while the case should be printed on its closed side (back face). No supports or anything needed. The snap system relies on a bridge when printing, depending on your cooling you may need to work the snaps open after they come of the print bed. Some gentle force or even carefully running a blade around the three free sides can help