LimeSDR-Mini Case w/ Bolts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same case as before, but uses actual bolts to stay closed now. My old closure system definitely wasn't the best. Uses…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Same case as before, but uses actual bolts to stay closed now. My old closure system definitely wasn't the best. Uses m2.5 hardware, I used m2.5*16 bolts because they were the best length of what I had available from a cheap set of hardware I got off Amazon.
I also added recessed arrows to differentiate TX and RX, I'm not super happy with how they printed but it is fine for now. If you have a better idea on how to accomplish this let me know in the comments
Print Settings
Printer:
Anet A8
Rafts:
No
No
Notes:
No infill just jacked up shell count until it was solid
You might need to drill out the holes to get the hardware to fit depending on your printer. I did not have to though
Category: Electronics