1 / 4
DIY Battery Grip for Neewer HS60B with NP-F Battery — zdjęcie 1
1 / 4

DIY Battery Grip for Neewer HS60B with NP-F Battery

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DIY battery grip for Neewer HS60B: power with NP-F batteries, compact, portable

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

These 3D print models provide everything you need to create a custom battery grip for the Neewer HS60B video light. The grip is designed for two NP-F batteries (7.4V), wired in series to double the voltage, allowing you to power the light independently from any outlet or power bank—ideal for mobile setups and DIY projects.

For more details, check out the video-Review here: https://www.youtube.com/watch?v=XvXmcVGN7gI

Parts Needed:  
- 2x NP-F batteries: https://ebay.us/lWEV6Y
- 3x M3 screws (20mm length) to assemble the grip and battery holder: https://ebay.us/LR8ASh
- Zwergstecker H0 HO pins for battery connectors: https://ebay.us/Tp6PWl 
- Barrel jack connector for connecting to the light  
- Wiring for connecting the battery connectors and barrel jack


Note: Basic electronics knowledge is recommended to safely wire the batteries in series and handle the soldering. Use at your own risk.

Tagi