1 / 5
Subaru Outback 2024 Gen.6 Phone Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
phon holder made of 2 parts. Fastening without screws, just by clamping.
- Ocena
- 3 / 5
- Polubienia
- 37
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1507
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (63)Powiązane
The only resonable place to attach a telephone is on the center tunnel on the right (with left-hand steering). Made from 2 parts so that you can adapt the holder to a different mount. I use a 40mm magnetic mount. Printed with Gyroid Infill and 40%, PETG. The holdet needs support for printing. To connect the clamp and the holder you can use superglue or M3 fusible nuts.