Sony MDR-ZX600 replacement headphone bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the swiveling side brackets on Sony MDR-ZX600 on-ear headphones.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
After a side bracket on my old Sony MDR-ZX600 headphones broke, I modeled this replacement part over a bunch of iterations.
I'm only providing a file for the right side (since that's the one I had to replace), but just mirroring it should give you the left bracket. (If you try it and this indeed works, please let me know so I can edit this text and put it up as an individual file 😊).
When printing, make sure all the mechanical connectors and the rounded ends of the bracket have supports below them. I used a 0.4 mm nozzle, 0.15 mm layer height and PETG. The part tends to need some manual cleanup after printing, otherwise it might have too much friction when moving.