GoPro/Headlight Cycling Handlebar Combo Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-part mount designed to hold both my headlight and GoPro. Secured with zip ties.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I wanted to mount my GoPro to record videos while cycling and I also didn't like how my headlight was mounted to my handlebars (the OG one is rubber and was stretched to the point where I thought it would fall off) so I made this.
A quick disclaimer, there's a screw that's used to secure the light to it's original mount and I carried it over to the mount I made. I recessed the screw as much as I initially could, but it still seemed to stick out a bit and in turn caused some scratching on my handlebars, so I added some masking tape to hopefully fix the scratching issues. Adding the tape also makes for an improper fit for the mount itself so I'll likely make adjustments in the future to fix it.
Also, no threaded heat inserts were used in this model, the standard mounting screw goes into the plastic itself (it's fairly tight at first), be cautious not to overtighten it!
Printed with Hatchbox PLA Pro+, .04mm nozzle, default print settings (Prusa MK3S+)