Pegboard Storage/Parts Tray Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @Shabubu's parts tray, thinned the walls for faster printing, beefed pins, and smoothed it up for no reason.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I liked the original model, but decided on a couple changes to suit myself:
- thinner walls since I can get away with only 3 walls with my p8 nozzle (2.4mm thick)
- made it into a smoothboi since I don't want to fight a retaining lip or angles to grab stuff fast
- made it 10mm more narrow since I wanted to more easily fit 'em side-by-side. They would have been totally flush without that change (for better or worse).
This is actually a ‘from scratch’ redesign, I only grabbed one of the side surfaces to make exactly the same angles on my version. That said, it looks the same.
I actually grabbed the pegs from the back from this model:
https://www.printables.com/model/39597-pegboard-caliper-holder
(although I am still not sure why the top pegs are square, and sliiiiiiightly tilted off true, but they are robust and work well, so gift horse: meet mouth)
65mm wide, 92mm horz depth, 46mm max vert depth
Optimized for a p8 nozzle, but will work with p4 if that's all you've got.
I didn't need support for the top pins (even with a p8 nozzle), but you may need some if your cooling is just OK. I added some auto-supports in cura for the curves and bottom pins since it's not much material.