Nilfisk/Milwaukee Dust Collector Quick Connect to 2-1/4" Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts quick connect hose end from Nilfisk found on the Milwaukee 8 Gallon dust extractor and Attix 33 to 2-1/4" (57mm)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in 4 walls 35% infill out of petg-cf which came out incredibly strong.
Print it with the large 57mm end on the build plate.
Make sure normal support (snug) is on for the small section in the middle where the snap lock goes. I also used an internal brim to help keep it down but may not be necessary.
Nilfisk never made an adapter in this size strangely so I made one for 2-¼" (57mm) dust ports found on table saws etc.
This is for my Milwaukee 8960-20 8 gallon dust extractor (that is made by Nilfisk and essentially the same as the Attix 33).