1 / 2
15min Vase Mode Coffin Halloween Decoration
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Coffin Halloween Decoration. Created in ~15min and also printed in ~15min in vase mode
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
A simple Coffin Halloween Decoration that was created in ~15min and can also be printed in ~15min (or scaled up and take more time 😉).
By investing more time the model probably could be optimized (more detail, better print results), but than it wouldn't be a 15min model anymore 😞. It was a fast idea, fast created and fast printed 👍
Print it fast, put it on a table for your Halloween party and done 🎉
Print notes
- The model is meant to be printed in vase mode
- I would suggest having no bottom layers at all
- You can also print without top layers, too
- In my experience using extra width layer lines (e.g. 0.6mm for a 0.4mm nozzle) is beneficial for vase mode. Try it!
- Might need a brim (depending on your printer and/or filament)
- Also try scaling it up or down to fit your needs 👍