Infinite "PET Filament Pullstruder" Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extendable version of the "PET Filament Pullstruder" Spool
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Basically I needed the original spool to hold the equivalent of more than one bottle, the solution I came up with was to lengthen the spool body. But I elevated this idea so that it could be an "extended" or "infinite" spool body by dividing the spool into 3 parts, and the height of the body could be changed so that it would be stretched.
The "SpoolBody" can be extended as your wish by adjusting the height
Would need 3x M3 Threaded Rod and 6x M3 Nuts
Printed with 0.2mm quality w/ 40% infill. Print on its side; no supports required.
(Model Origin: https://www.printables.com/model/304040-pet-filament-pullstruder )