1 / 2
SKADIS Caliper holder for Mahr 16EX/300
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For 300 mm and longer calipers, if they have the same jaw geometry (this one is 65mm long).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Usually, 300 mm calipers have longer jaws than the 150 mm ones, so my Mahr 16EX could not fit the ordinary holders.
Print it with slanted side down, no support needed.
I printed it with Esun PLA+, 2 walls and 15% grid infill.
Caliper model number: 4102360