Architect Lamp Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base/Fixture for Architect Lamp
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a base/fixture for the architect lamp. You will need a lamp and the 90 degree angle metal clamp .
The hole for the lamp has the diameter of 14mm. The diameter for the metal clamp is approx. 7mm. If you need other sizes an can't modify it, drop me a message here with the dimensions you need. Then I might upload a versions with matching it.
The End part (pick 10mm, 15mm or 20mm) is recommened to be glued to the top part's bottom. Se photos.
Slice with at least 6 top and bottom layers for 0.2mm per layer and at least 10 walls (nozzle 0.4 and line width 0.,45) and 40% infill (cubic).
The model on the picture is printed in white ABS. ABS or ASA is recommended.
Standard PLA is usually too brittle for the forces this model will have to endure. Also this model is when used/clamped under constant pressure. PLA and PETG will under pressure over time have molecule layers to skid/jump making PLA/PETG unsuitable for this model.