1 / 2
Vertical 240mm x 25mm raditor hard drive bay mount for InWin S-Frame case — zdjęcie 1
1 / 2

Vertical 240mm x 25mm raditor hard drive bay mount for InWin S-Frame case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter will take any 3.5" hard drive bay screw holes and vertically mount the radiator that is 25mm thick.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
156
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

As the InWin case is very limited in space, I have to be very creative for mounting additional radiators for the CPU. I assume you can change the base plate to fit whatever mounting standard you want, but I made it for the InWin S-frame in particular. 

I printed it with PLA, so if you are using other material, make sure you figure out the correct shirking factor. 

Tagi