Guide for the Airport and Altitude Cards in the Sky Team Boardgame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide which fits the space on the background of the Game perfectly. No more wiggling Airport or Altitude Cards.
- Ocena
- 4,5 / 5
- Polubienia
- 36
- Pobrania
- 360
- Wydruki
- 3
- Wyświetlenia
- 1641
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When playing that great game i was annoyed when i had to move the airport or altitude cards and they did not stay in line. So i designed a little Guide which adds no thickness to the game board to fit existing Inserts. The cards slide in and out perfectly and no more messing up the airplane order. I provided 2 Versions one is with a window pane (which looks nicer) and one without, i did not print the variant without the pane but it should work just fine.
Print it upright with some tree supports and a small 4 layer raft.
I used some small adhesive strips i had around, but you can use the spares which come with the game too i guess.
It's a fast print with only about 11g of material.
Note: The Tolerances of the Model are pretty tight. You need to have your settings dialed in properly.
Printed on a Bambulab A1 with Jayo Grey PLA.
This is my first model on Printables i hope it's as game enhancing for you as for me.
Enjoy!
